Category: Engineering

The standard 1 page essay with a thesis, 3 body paragraphs and a conclusion. Needs five sources and can not be detected by a ai

I want to write a couple of good paragraphs about myself to add to my LinkedIn profile. I am an electrical engineer and used to work at the Marriott. I love both the technical work and the hospitality management work. Could you please write a couple of paragraphs describing my experience based on my resume?

I need editing/rewriting/proofreading of the “Final Research Paper…” attached below. This paper needs to include images/diagrams/ graphs throughout the entire to show my findings/learnings about the topic of wearable biosensors. These images must have image descriiptions. This paper needs to follow the guidelines and formatting discussed in the attachment, “Formatting and Parts for your final 10-page paper”. This paper should include extensive information and findings from the source included in my attached Annotated Bibliography. This paper must include in-text citations in APA 7th style. Absolutely NO plagarism.

Task summary: You are to complete the project by creating an “A-frame Stand” similar to the one in the figure below with a narrower width.
Full order description: Dear Freelancer,please complete the following task:
📋 EXAMPLES OF PROBLEMS OR QUESTIONS: Scope of the project/design criteria:
1) Use a CAD software to create a 3D model of the new A-frame stand design.
2) Identify the standard that such a design would have to comply with.
3) The A-frame stand design is to be able to withstand 30,000 lbs load applied symmetrically at two stand pockets (15,000 lbs each side). The pockets are to be 35″ away from each other. (see figure below for illustration)
📎 ATTACHED:-Instructions.

Task summary: You are to complete the project by creating an “A-frame Stand” similar to the one in the figure below with a narrower width.
Full order description: Dear Freelancer, please complete the following task:
📋 EXAMPLES OF PROBLEMS OR QUESTIONS: Scope of the project/design criteria:
1) Use a CAD software to create a 3D model of the new A-frame stand design.
2) Identify the standard that such a design would have to comply with.
3) The A-frame stand design is to be able to withstand a 30,000 lbs load applied symmetrically at two stand pockets (15,000 lbs on each side). The pockets are to be 35″ away from each other. (see figure below for illustration)📎 ATTACHED:-Instructions. –

Please see the details of the assignment in the attached picture. Just need to do the 500-750 word part. Don’t do the 2 response posts. I need it in 8 hours from now.

Even before we get into the rules and details about construction safety, we can look over some photos that have obvious rule violations. Write a discussion post addressing all four of these photos, and then comment on your classmates’ posts.

Answer all the questions with the drawing in the last question in a clear and detailed manner, and if possible, put some tables in comparison with some pictures.

This is going to be my chapter 2 of my thesis report. 
determining ionic conductivity of electrolyte using EIS.
Concentrate on previous work and progress of Na-ion electrolyte. I have also attached some of the work i started use that too.
Please use the following references as well as additional references focusing on Na-ion electrolyte, include equations and figures too.
Electrochemical Impedance Spectroscopy A Tutorial. Alexandros Ch. Lazanas and Mamas I. Prodromidis*   Cite This: ACS Meas. Sci. Au 2023, 3, 162−193
Solid polymer electrolytes: Ion conduction mechanisms and enhancement strategies Dongmei Zhang§ , Xianglong Meng§ , Wenyan Hou§ , Weihao Hu, Jinshan Mo, Tianrong Yang, Wendi Zhang, Qianxiao Fan, Lehao Liu , Bing Jiang, Lihua Chu, and Meicheng Li 

Can you rewrite my resume like in the college resume template? Also, I need a strong profile for the engineering field.